Finned Sheathed Hairpin Heater Element

Home/Air Heater, Electric heater/Finned Sheathed Hairpin Heater Element

Finned Sheathed Hairpin Heater Element

Finned Sheathed Hairpin Heater Element

ELECTRICAL SPECIFICATION:

  • WORKING VOLTAGE: 230Vac
  • MUST COMPLY WITH BS7671 & LVD73/23/EEC
  • FLASH TEST WITHSTAND 1500V FOR 2 SECONDS.
  • INSULATION RESISTANCE > 1G OHM
  • LEAKAGE CURRENT (AT 230 Vac) < 0.1mA
  • ELEMENT POWER TOLERANCE: ± 7.5%

PERFORMANCE SPECIFICATION:

  • SURFACE TEMPERATURE MUST NOT EXCEED 400°C IN 0.75M/S AIRFLOW.
  • SHELF LIFE (AT NOMINAL AMBIENT TEMP & RH) > 3 MONTHS
  • MAXIMUM EXPANSION IN DIRECTION OF PEG AT WORKING TEMP. = 13mm

CONSTRUCTION SPECIFICATION:

  • ALL TOLERANCES ±1% UNLESS STATED OTHERWISE.
  • SHEATH MATERIAL: NOMINAL 8MM DIA STAINLESS STEEL (GRADE 304)
  • PEG MATERIAL: NOMINAL 6.35MM DIA STAINLESS STEEL TUBE
  • FINISH: STAINLESS STEEL FIN.
  • ELEMENT MATERIAL: KANTHAL D OR EQUIVALENT
  • INSULATION: MAGNESIUM OXIDE POWDER.
  • TERMINATIONS: 4BA THREADED PIN WITH CUP WASHERS, ANTI-VIBRATION
  • WASHERS AND LOCK NUTS.
  • FIXINGS: 1/4″ BSP THREADED FERRULES

By | 2021-03-25T09:57:38+08:00 March 25th, 2021|Air Heater, Electric heater|0 Comments

About the Author:

Leave A Comment