Finned sheathed hairpin heater elements

Home/Air Heater, Electric heater/Finned sheathed hairpin heater elements

Finned sheathed hairpin heater elements

ELECTRICAL SPECIFICATION:

  1. WORKING VOLTAGE: 230Vac
  2. MUST COMPLY WITH BS7671 & LVD73/23/EEC
  3. FLASH TEST WITHSTAND 1500V FOR 2 SECONDS.
  4. INSULATION RESISTANCE > 1G OHM
  5. LEAKAGE CURRENT (AT 230 Vac) < 0.1mA
  6. ELEMENT POWER TOLERANCE: ± 7.5%

PERFORMANCE SPECIFICATION:

  1. SURFACE TEMPERATURE MUST NOT EXCEED 400°C IN 0.75M/S AIRFLOW.
  2. SHELF LIFE (AT NOMINAL AMBIENT TEMP & RH) > 3 MONTHS
  3. MAXIMUM EXPANSION IN DIRECTION OF PEG AT WORKING TEMP. = 13mm

CONSTRUCTION SPECIFICATION:

  1. ALL TOLERANCES ±1% UNLESS STATED OTHERWISE.
  2. SHEATH MATERIAL: NOMINAL 8MM DIA STAINLESS STEEL (GRADE 304)
  3. PEG MATERIAL: NOMINAL 6.35MM DIA STAINLESS STEEL TUBE
  4. FINISH: STAINLESS STEEL FIN.
  5. ELEMENT MATERIAL: KANTHAL D OR EQUIVALENT
  6. INSULATION: MAGNESIUM OXIDE POWDER.
  7. TERMINATIONS: 4BA THREADED PIN WITH CUP WASHERS, ANTI-VIBRATION WASHERS AND LOCK NUTS.
  8. FIXINGS:1/4″ BSP THREADED FERRULES.

By | 2021-09-07T10:34:56+08:00 September 7th, 2021|Air Heater, Electric heater|0 Comments

About the Author:

Leave A Comment